Mark6 Cable Connections
Mark6 Front Cable Connections
The picture above shows the Mark6 front cable connections. Each slot has 2 cables. The cables are labelled: 1 top, 1 bottom, 2 top, 2 bottom.
Mark6 Rear Cable Connections
The picture above shows the Mark6 rear cable connections.
The blue network cable indicates where the network connection should be made.
The four cables that connect to the front of the modules are inserted into the left hand host bust adapter. From top to bottom the order of the cables is: 1 bottom, 1 top, 2 bottom, 2 top.
The CX4 cable that connects to the xcube is connected to the lower right CX4 connector.