Mark6 Cable Connections

Mark6 Front Cable Connections

IMG 1030.JPG

The picture above shows the Mark6 front cable connections. Each slot has 2 cables. The cables are labelled: 1 top, 1 bottom, 2 top, 2 bottom.

Mark6 Rear Cable Connections

IMG 1032.JPG

The picture above shows the Mark6 rear cable connections.

The blue network cable indicates where the network connection should be made.

The four cables that connect to the front of the modules are inserted into the left hand host bust adapter. From top to bottom the order of the cables is: 1 bottom, 1 top, 2 bottom, 2 top.

The CX4 cable that connects to the xcube is connected to the lower right CX4 connector.
Topic attachments
I Attachment Action Size Date Who Comment
IMG_1030.JPGJPG IMG_1030.JPG manage 2 MB 2018-02-20 - 18:24 MarkWainright Picture of Mark6 Front Cable Connections
IMG_1032.JPGJPG IMG_1032.JPG manage 2 MB 2018-02-20 - 18:40 MarkWainright Picture of Mark6 Rear Cable Connections
Topic revision: r1 - 2018-02-20, MarkWainright
This site is powered by FoswikiCopyright © by the contributing authors. All material on this collaboration platform is the property of the contributing authors.
Ideas, requests, problems regarding NRAO Public Wiki? Send feedback