0. Connect tog to the netburner card on the instrument.

1. Boot tog and select the offsite networking boot option.

2. Log in as lmonctrl.

3. cd to /export/home/tog/monctrl, if needed.

4. Source .kfpa_profile.

5. Start the M&C processes (TaskMaster tog systemstart; TaskMaster tog status)

6. The manager output can be viewed at the latest ~/gbt/etc/log/tog/RcvrArray18_26.(timestamp) file using 'tail -f'.

7. Start cleo (.kfpa_profile sets up the enviroment so...just type 'cleo') and launch device explorer.

8. Select RcvrArray18_26 in the 'Manager' list and then turn the manager on (Managers->On).

9. If there are no NACKs, the manager output will show some sample and activate outputs. If there are NACKS, the manager output will show 'activate failed' output.

10. I disabled the monitors for testing. You can enable them in the ~/gbt/etc/config/RcvrArray18_26.conf [Monitor_Enable] section. You will at minimum want to enable ID_COMMON_MNTR for the cryo values.

-- MarkWhitehead - 2009-11-19
Topic revision: r1 - 2009-11-19, MarkWhitehead
This site is powered by FoswikiCopyright © by the contributing authors. All material on this collaboration platform is the property of the contributing authors.
Ideas, requests, problems regarding NRAO Public Wiki? Send feedback