IF Spectrums

IDM Type I

  • spurs.xls: Spreadsheet with IDM Type I output spectrums.

IDM Type II

The IDM Type II prototype gain flatness was measured by detecting the IF output using an HP 8566 spectrum analyzer. The analyzer was set to Peak Hold and a synthesizer connected to the IDM input ports was used to sweep the RF passband. The LO1 doubler input was stepped by 500 MHz. It is believed the spurs shown in some 21 Jan plots are due to a nearby network analyzer interfering - they were not seen the following day with analyzer off.

Topic attachments
I Attachment Action SizeSorted ascending Date Who Comment
DewarNidm2.pdfpdf DewarNidm2.pdf manage 1 MB 2009-01-22 - 16:16 UnknownUser Dewar and IDM2 gain compression
IDM2specAnTests.pdfpdf IDM2specAnTests.pdf manage 2 MB 2009-01-22 - 11:15 UnknownUser 21 Jan 2009 Output spectrum of Type II IDM
spurs.xlsxls spurs.xls manage 220 K 2009-01-14 - 16:27 UnknownUser Spreadsheet with IDM Type I output spectrums.
IDM2spectra.zipzip IDM2spectra.zip manage 456 K 2009-01-14 - 16:13 UnknownUser Spectrum analyzer screen bitmaps vs. LO1
Topic revision: r4 - 2009-01-22, RogerNorrod
This site is powered by FoswikiCopyright © by the contributing authors. All material on this collaboration platform is the property of the contributing authors.
Ideas, requests, problems regarding NRAO Public Wiki? Send feedback