Monitor and Control of the K band Focal Plane Array Overview The GBT M C System The GBT monitor and control (M C) system, named Ygor, is a distributed object or...
KFPA M C Software Integration Path to a Common User Backend KFPA M C Manager The creation of a Manager and microcontroller firmware is the first step and handl...
Existing GBT K band Data There have been 167 projects that have used the existing K band receiver on the GBT. They are listed here. Of these, 134 have used the ...
Use the total power calibrated data, plus the information from the calibration module to arrive at the data in the units in which they will be imaged (is that alw...
Combines the information from the various M C FITS files into a data stream that the pipeline can be used. At the moment, the online sdfits filler does this task ...
This page documents work on converting GBT sdfits file to the format used by the ACSIS gridder. The ACSIS gridder is an application in starlink. Relevant docu...
This component is deferred until later in the pipeline development. Possible flagging schemes and needs should be described here. Main.BobGarwood 2009 07 14
A design for the data pipeline for the prototype GBT K Band Focal Plane Array Introduction See the KFPA wiki for more information on the GBT K Band Focal Plane A...
A design for the data pipeline for the proposed GBT K Band Focal Plane Array Introduction See the KFPA wiki for more information on the proposed GBT K Band Foca...
This wiki page exists so that ongoing pipeline discussion issues can be maintained and commented on in a single place. The current focus is on describing the use ...
Eventually this page will contain the links to the specific use cases that the pipeline will handle. The use cases should be specific enough so that the pipeline ...
This is obviously very much a work in progress. Right now it's primarily a note pad where thoughts and questions on the KFPA use cases can be displayed quickly. P...
Scratch space for thoughts on the KFPA data pipeline and processing issues. I am attempting to turn this into a KFPA data pipeline design document prior to the re...
GBT Data Visualization visually interacting with the ungridded data from the GBT. Requirements Examples * aips /dish relied on the viewer and msplot. See ...
Glen Langston provided the sample script and accompanying procedures attached here. These procedures are written specifically to work with two sets of mapping sc...
Frequency Switched KFPA Pipeline Use Case Figure 1: JCMT 850 um infrared image of Ophiucus, showing regions images B, C and D imaged with the GBT by Friesen et a...
This page was created prior to a phone meeting scheduled for 10AM on 11 Jan 2011. Eventually this list will be associated with tracked items on Pivotal Tracker (...
KFPA Data Analysis Meeting June 23 25, 2008 Purpose and Goals This is the first face to face meeting concerning the KFPA data pipeline and data analysis nee...
$ Frequency Switched : SIG switching is used and the signal and reference spectra are present in each integration. For each integration after doing the total pow...
Source Calibration notes for the Pipeline Currently (August 2009) the standard GBT IDL calibration procedures use a single (scalar) value for the Noise Diode valu...
Position Switched KFPA Pipeline Use Case Figure 1: Image of the distribution of HC7N in the Taurus Molecular Cloud (TMC) The KFPA imaging pipeline has t...
Makes use of the "cal" switching present in the data. If the CAL value does not switch between T and F an equal number of times, this step does nothing. In the c...
KFPA Weather models and Opacity calibration. This page describes the KFPA pipeline approach to calibration of the measured and model atmospheric opacity as a func...
KFPA Pipeline Weekly Meeting Agenda Next meeting Wednesday, June 16 2010 at 1:00pm in GB137 and CV331. 2010 06 16 1. Final review of agenda for Jun. 17 pipeli...
KFPA Automatic Balance of IF path Modification Request #? (C04 2009) 1. Introduction The basic observing modes for the KFPA are similar to those already used ...
KFPA LO and IF chain calculation requirements Modification Request #7 (C04 2009) 1. Introduction In order for the observers, engineers and commissioners to e...
Observation and Calibration Methods for the KFPA Modification Request #9 (C04 2009) 1. Introduction The KFPA Pipeline will monitor the GBT observing status an...
KFPA LO and IF chain calculation requirements Modification Request #? (C04 2009) 1. Introduction In order for the observers, engineers and commissioners to ef...
KFPA Astrid Pipeline Interface Modification Request #8 (C04 2009) 1. Introduction The GBT observer must communicate to the KFPA pipeline some parameters rega...
KFPA Astrid Pointing Modes Modification Request #? (C04 2009) 1. Introduction Effective use of the KFPA requires regular peaking on a bright radio source and ...
KFPA Astrid Spectral Line Modes Modification Request #? (C04 2009) 1. Introduction The basic observing modes for the KFPA are similar to those already used by...
The Resource estimates are driven by the target milestones for this project. Overall, we'd like this project to lead to a pipeline review. The goal of the pipelin...
Software WBS for KFPA Reference Documentation * Example WBS's from the DSS project: * https://staff.nrao.edu/wiki/bin/view/GB/DssSoftwareWbs (current)...
Prerequisites * A set of typical array observing modes: Project Scientist. * Expected data rates and volumes/scan lengths: Project Scientist. * A def...