TaskPriority | Task | Info/MR | Lead | Sponsor, Team | Notes | MR Status | Task Status |
---|---|---|---|---|---|---|---|
1 |
KFPA Manager |
|
|
|
|||
1 |
KFPA Firmware |
|
|
|
|||
2 |
LO1 Manager Modifications |
(Original draft: KfpaIfLoMr) |
|
|
|||
2 |
KFPA IF Manager Modifications |
(Original draft: KfpaIfLoMr) |
|
|
|||
3 |
KFPA Turtle Modifications |
(Related to original draft: KfpaSpecMr) |
|
|
|||
3 |
KFPA Antenna Manager Modifications |
|
|
|
|||
4 |
KFPA GFM Modifications |
|
|
|
|||
4 |
KFPA Configuration Script Development |
(Related to original drafts: KfpaSpecMr, KfpaPointingMr) |
|
|
|||
5 |
Add KFPA to the Config Tool |
Valuable for allowing KFPA to be used for standard K band observing |
|
|
|||
6 |
Add Hi/Lo Cal support to KFPA and IF Managers |
Decision to use fixed Lo Cal values only for the KFPA (MR tabled) |
|
|
|||
2 |
CLEO KFPA Rx update |
|
|
|
|||
2 |
Add Pipeline annotations to all Astrid Mapping blocks |
Makes Pipeline tools easily usable with all Receivers |
|
|
|||
1 |
Need manger changes to handle the added 2 beam wide band mode. This allows replacement of current K band receiver. |
|
|
|
TaskPriority | Task | Info/MR | Lead | Sponsor, Team | Notes | MR Status | Task Status |
---|---|---|---|---|---|---|---|
N/A |
Software Design for Data Handling of KFPA |
The design docs need to be turned into MRs. |
N/A |
|
|||
2 |
Add weather-based calibration scalars to SDFITS output (tau-zenith and Tatm) |
|
tau-zenith and Tatm - still being written |
|
|
||
5 |
Online sdfits modifications to begin filling while scan is in progress. |
|
Still tweaking this. Low priority |
|
|
||
1 |
Develop prototype pipeline |
|
|
|
|||
2 |
Pipeline Directives |
|
|
|
|||
2 |
PTCS Database to Pipeline |
|
|
|
|||
1 |
Change how online sdfits protects against errors. |
|
|
|
Task | Info/MR | Lead | Sponsor, Team | Notes | MR Status | Task Status |
---|---|---|---|---|---|---|
Add additional rest frequencies to GO FITS file to be used by SDFITS |
|
|
|
|||
Automatic Balance |
|
|
Original draft: KfpaBalance. We think that this task is essentially already done because balancing for IF Rack and Spectrometer already available. Nothing new in terms of M&C balancing in the KFPA hardware per se. |
N/A |
|
|
Define KFPA Pipeline Control Parameters |
|
|
|
|||
Modify SDFITS to flip KFPA spectra coming from the lower sideband so that all share the same IF number. |
|
|
|
|||
Modify SDFITS to read new rest frequency keywords from GO FITS file. |
|
|
|
|||
Receiver FITS file modifications for KFPA and other multi-feed Rxs |
|
|
We think that this task is essentially already done as the Measurements Manager and the Rx calibration database already supports multi-feed receivers. |
N/A |
|
|
SDFITS: Tracking the RA, Dec of the selected beam in multi-beam feed systems |
|
|
|