KFPA Software Queue



M&C

TaskPriority Task Info/MR Lead Sponsor, Team Notes MR Status Task Status
1 KFPA Manager ModificationRequest2C209 MarkWhitehead StevenWhite, AmyShelton   DONE DONE
1 KFPA Firmware ModificationRequest3C209 PatrickBrandt StevenWhite, AmyShelton   DONE DONE
2 LO1 Manager Modifications ModificationRequest16C509 MarkWhitehead StevenWhite (Original draft: KfpaIfLoMr) DONE DONE
2 KFPA IF Manager Modifications ModificationRequest17C509 MarkWhitehead StevenWhite (Original draft: KfpaIfLoMr) DONE DONE
3 KFPA Turtle Modifications ModificationRequest18C509 PatrickBrandt GlenLangston (Related to original draft: KfpaSpecMr) DONE DONE
3 KFPA Antenna Manager Modifications ModificationRequest20C509 JoeBrandt GlenLangston   DONE DONE
4 KFPA GFM Modifications ModificationRequest21C509 PatrickBrandt GlenLangston   DONE DONE
4 KFPA Configuration Script Development ModificationRequest19C509 GlenLangston GlenLangston (Related to original drafts: KfpaSpecMr, KfpaPointingMr) DONE DONE
5 Add KFPA to the Config Tool ModificationRequest3Q210 GlenLangston GlenLangston Valuable for allowing KFPA to be used for standard K band observing DONE MOVED TO...
6 Add Hi/Lo Cal support to KFPA and IF Managers ModificationRequest2Q310 MarkWhitehead StevenWhite, AmyShelton Decision to use fixed Lo Cal values only for the KFPA (MR tabled) ALERT!  
2 CLEO KFPA Rx update ModificationRequest2Q111 StevenWhite RonMaddalena   PICK  
2 Add Pipeline annotations to all Astrid Mapping blocks ModificationRequest6Q111 AmyShelton GlenLangston Makes Pipeline tools easily usable with all Receivers ALERT!  
1 Need manger changes to handle the added 2 beam wide band mode. This allows replacement of current K band receiver. ModificationRequest12Q111 StevenWhite StevenWhite      

New MR: ModificationRequest1Q312

Pipeline

TaskPriority Task Info/MR Lead Sponsor, Team Notes MR Status Task Status
N/A Software Design for Data Handling of KFPA KFPA Data Pipeline Design Future GBT Data Handling BobGarwood StevenWhite, AmyShelton The design docs need to be turned into MRs. N/A  
2 Add weather-based calibration scalars to SDFITS output (tau-zenith and Tatm) ModificationRequest23C509 BobGarwood   tau-zenith and Tatm - still being written REFACTOR  
5 Online sdfits modifications to begin filling while scan is in progress. ModificationRequest22C509 BobGarwood   Still tweaking this. Low priority REFACTOR  
1 Develop prototype pipeline ProjectRequest1Q110 BobGarwood, JoeMasters GlenLangston   MOVED TO... MOVED TO...
2 Pipeline Directives ProjectRequest1Q410 BobGarwood, JoeMasters GlenLangston   MOVED TO... MOVED TO...
2 PTCS Database to Pipeline ProjectRequest4Q410 BobGarwood, JoeMasters GlenLangston RichardPrestage   MOVED TO... MOVED TO...
1 Change how online sdfits protects against errors. ModificationRequest8Q410 BobGarwood GlenLangston   DONE DONE

Key for the "MR Status" column:
  • DONE (%Y%) means the MR has final sponsor sign-off
  • MOVED TO... (%M%) means the MR is awaiting final sponsor sign-off
  • PICK (%S%) means the MR is being implemented (has CCC approval)
  • ALERT! (%X%) means the MR needs CCC approval
  • REFACTOR (%P%) means the MR is either being written, checked, or needs initial sponsor approval
  • N/A means there is no MR for this task

Key for the "Task Status" column:

  • DONE (%Y%) means the task has been successfully completed
  • MOVED TO... (%M%) means the task has been completed and is awaiting integration tests
  • PICK (%S%) means the task has been completed and is awaiting sponsor tests
  • ALERT! (%X%) means the task is suspended or tabled. Add reason in notes column.
  • ok means that the task is not yet complete or ready for tests, but ALS has evaluated results & progress is clearly on track

Completed Tasks

Task Info/MR Lead Sponsor, Team Notes MR Status Task Status
Automatic Balance     GlenLangston Original draft: KfpaBalance. We think that this task is essentially already done because balancing for IF Rack and Spectrometer already available. Nothing new in terms of M&C balancing in the KFPA hardware per se. N/A DONE
Receiver FITS file modifications for KFPA and other multi-feed Rxs     GlenLangston We think that this task is essentially already done as the Measurements Manager and the Rx calibration database already supports multi-feed receivers. N/A DONE
Define KFPA Pipeline Control Parameters ProjectRequest10Q110 GlenLangston, JoeMasters BobGarwood   DONE DONE
SDFITS: Tracking the RA, Dec of the selected beam in multi-beam feed systems ModificationRequest3C608 BobGarwood GlenLangston   DONE DONE
Add additional rest frequencies to GO FITS file to be used by SDFITS ModificationRequest1Q110 BobGarwood GlenLangston   DONE DONE
Modify SDFITS to read new rest frequency keywords from GO FITS file. ModificationRequest5Q110 BobGarwood GlenLangston   DONE DONE
Modify SDFITS to flip KFPA spectra coming from the lower sideband so that all share the same IF number. ModificationRequest1Q310 BobGarwood GlenLangston   DONE DONE
Topic revision: r74 - 2016-06-08, PatrickMurphy
 

This site is powered by FoswikiCopyright © by the contributing authors. All material on this collaboration platform is the property of the contributing authors.
Ideas, requests, problems regarding NRAO Public Wiki? Send feedback