1. The OPT does not open any project until a user selects one. Previously the OPT automatically opened the first project in the tree. (For users whose first project is a large one, this has the happy side effect of allowing the OPT to open more quickly.) 2. If User 1 has Project P open and User 2 attempts to view Project P, User 2 will be told that they are not allowed to even view the project until User 1 exits the OPT. Previously User 2 could view, but not edit, Project P in this situation. This is a stop-gap change that will probably be in place for about a month, at which time we hope to have a better, permanent, solution to the data-clobber problem. 3. To get write (and read) access to Project P, User 2 no longer has to exit the OPT. Once User 1 exits, User 2 may select Project P and begin to view and edit it. Previously both Users 1 and 2 had to exit the OPT before write access could transfer from 1 to 2 for Project P.
|Crab nebula||Complete||10/10||L-band OSRO1/OSRO2||Complete|
|Cygnus A||Ready||3x6||1x10 possible; 12 OSRO hours obtained||Withdrawn|
|Herc A||Ready||3/5||CX bands||Partial|
|IRC+10216||Ready (HF)||16/33||Partial; revisit in DnC/C||Partial|
|M87||Ready (HF)||0/6||Ka||Not done|