1. The OPT does not open any project until a user selects one. Previously the OPT automatically opened the first project in the tree. (For users whose first project is a large one, this has the happy side effect of allowing the OPT to open more quickly.) 2. If User 1 has Project P open and User 2 attempts to view Project P, User 2 will be told that they are not allowed to even view the project until User 1 exits the OPT. Previously User 2 could view, but not edit, Project P in this situation. This is a stop-gap change that will probably be in place for about a month, at which time we hope to have a better, permanent, solution to the data-clobber problem. 3. To get write (and read) access to Project P, User 2 no longer has to exit the OPT. Once User 1 exits, User 2 may select Project P and begin to view and edit it. Previously both Users 1 and 2 had to exit the OPT before write access could transfer from 1 to 2 for Project P.
Project | Status | Time | Comments | SB |
---|---|---|---|---|
M87 | Ready (HF) | 0/6 | Ka | Not done |
M82 | Complete | 2/2 | L band | Complete |
M51 | Ready (MR) | 8/8 | Complete | |
IRC+10216 | Ready (HF) | 16/33 | Partial; revisit in DnC/C | Partial |
Herc A | Ready | 3/5 | CX bands | Partial |
Cygnus A | Ready | 3x6 | 1x10 possible; 12 OSRO hours obtained | Withdrawn |
Crab nebula | Complete | 10/10 | L-band OSRO1/OSRO2 | Complete |