CASPER Workshop Aug 2012 To do list to have the hardware in place prior to the workshop 08/01/12 Status updates embedded below in red (JMR) Hardware * Mo...
Green Bank Spectrometer Project Number 450102 Description: Status Update and To Do List * VegasStatusUpdate * VegasToDoList Project Description * Ove...
Guppi Upgrades Modification Request #2 Q3 2011 1. Introduction GUPPI is getting lots of use, and there are a couple of commonly used modes that could be better...
Array Spectrometer Money has become available to build a 7 pixel FPA for the GBT, expandable to 61 pixels. Our GBT Spectrometer is an 800 MHz, 8 sampler, 2048 ch...
How to Record Data using ROACH Ultimate Pulsar Processing Instrument Below listed are the instructions to record data using RUPPI with teh spectrometr deisgn load...
ROACH user's guide The below are the instructions to get things up and running a design in the ROACH. 1 Boot the ROACH Open a putty/xterm window and connect to...
Roach Lab Spectrometer The old lab spectrometer is dead. Or at least it's pining for the Fjjords. We need something for the receiver guys to use. Specs This sp...
Roach Ultimate Pulsar Processing Instrument (RUPPI) Introduction The RUPPI is developed to upgrade from IBOB's and BEE2 in the WUPPI system to the ROACH. It is a...
SC 09 in Portland, OR Summary By John Ford(JF), Pam Ford (PF), and Patrick Prandt(PB) Unattributed sections by random combinations of the authors. General Infor...
SC10 General Information The show was held in New Orleans. The convention center is downtown by the river, about 3/4 mile from the French Quarter. Very convenien...
VEGAS Pulsar Mode Integration Planning Page Actions: * John Ford: Set up a telecon with Dave McMahon * All: Check for missing tasks; complete effort and ...
Log of Wuppi Pulsar Configurations and Example Data The WUPPI pulsar backend is used with the 43m in a variety of observing configurations. This document is a chr...