VEGAS Tests 2013 Aug 09 Goals * Run VEGAS with the L band receiver, and demonstrate to Galen that the converter rack settings need to be 0dB / 35 dB * Run ...
Testing June 18, 2014 Goal: * Take some test Q band data to show final ripple solution. * Look VEGAS data monitor (Joe Master's restarted server). * che...
TGBT15A_915_109 Continued "New Manager, new HPC" spectral line regression tests Goals * Continue testing new spectral line modes Details * 10:00 11:45...
GUPPI User's Guide NOTE: As of 9/21/2009 the procedures on this page should not be used for standard GBT GUPPI observations. Up to date observing instructions can...
Roach Ultimate Pulsar Processing Instrument (RUPPI) Introduction The RUPPI is developed to upgrade from IBOB's and BEE2 in the WUPPI system to the ROACH. It is a...
Revised Parkes Spec Design This design is an revision to the ParkesSpec Stokes design. This design was proved to be working with the two servers Tofu and Cicada2...
VEGAS "Square Wave" (Non) Problem in the Data Manager Description When looking at the output of the VEGAS data manager, occasionally the output will look like a ...
GUPPI has been retired and is no longer available for observing. Pulsar observers should exclusively use VEGAS pulsar modes. Observing Instructions for VEGAS Pul...
VEGAS Operations and Trouble Shooting Guide If you are stuck If you cannot find the help you need here, first port of call is the on duty support scientist: sche...
West Virginia University Ultimate Pulsar Processing Instrument (WUPPI) Introduction The WUPPI is a clone of GUPPI. It is a hardware which was developed from reco...