TGBT14A_912_84 - VEGAS tests with the DCR
X-band, Mode 4, high cal ABORTED
Configure VEGAS for cal switching; look at VEGAS IF module monitor with DCR
Set up at 2pm. Need ray to switch versions, etc
Set up a super script which will do everything I want, correctly I hope...bank_gain_mode4_vegas_dcr
Scan 1 - test of above script
X-band, Mode 4, high cal
-15dB to -24dB in steps of 3dB, 3 scans at each value
Scans 2 - 9
Abort! I have the wrong analog filter rack modules selected...
Select these by hand. I don't see the cal switching in the DCR, but I think I have everything right.
Above is going to take too long; switch to four scans per mode.
Still don't see VEGAS Analog IF values switching in the monitor output... Seems like something is resetting AFR, need to add this...
Cannot get SetAFR script to work.... Give up at this point
This topic: CICADA
Copyright © by the contributing authors. All material on this collaboration platform is the property of the contributing authors.
Ideas, requests, problems regarding NRAO Public Wiki?