TGBT14A_912_84 - VEGAS tests with the DCR
Goals
Details
X-band, Mode 4, high cal ABORTED
Goals
Configure VEGAS for cal switching; look at VEGAS IF module monitor with DCR
Details
Set up at 2pm. Need ray to switch versions, etc
Set up a super script which will do everything I want, correctly I hope...bank_gain_mode4_vegas_dcr
Scan 1 - test of above script
X-band, Mode 4, high cal
ABORTED
-15dB to -24dB in steps of 3dB, 3 scans at each value
Scans 2 - 9
Abort! I have the wrong analog filter rack modules selected...
Select these by hand. I don't see the cal switching in the DCR, but I think I have everything right.
Above is going to take too long; switch to four scans per mode.
Still don't see VEGAS Analog IF values switching in the monitor output... Seems like something is resetting AFR, need to add this...
Cannot get SetAFR script to work.... Give up at this point
--
RichardPrestage
- 2015-03-18
This topic: CICADA
>
WebHome
>
GreenBankSpectrometer
>
CICADAGreenBankSpectrometerCommissioningLogs
>
CICADAGreenBankSpectrometer2015Mar18
Topic revision:
2015-03-18,
RichardPrestage
Copyright © by the contributing authors. All material on this collaboration platform is the property of the contributing authors.
Ideas, requests, problems regarding NRAO Public Wiki?
Send feedback