TGBT14A_912_84 - VEGAS tests with the DCR

Goals

  • Configure VEGAS for cal switching; look at VEGAS IF module monitor with DCR

Details

  • Set up at 2pm. Need ray to switch versions, etc
  • Set up a super script which will do everything I want, correctly I hope...bank_gain_mode4_vegas_dcr
  • Scan 1 - test of above script

X-band, Mode 4, high cal ABORTED

  • -15dB to -24dB in steps of 3dB, 3 scans at each value
  • Scans 2 - 9
  • Abort! I have the wrong analog filter rack modules selected...
  • Select these by hand. I don't see the cal switching in the DCR, but I think I have everything right.
  • Above is going to take too long; switch to four scans per mode.
  • Still don't see VEGAS Analog IF values switching in the monitor output... Seems like something is resetting AFR, need to add this...
  • Cannot get SetAFR script to work.... Give up at this point

-- RichardPrestage - 2015-03-18
Topic revision: r1 - 2015-03-18, RichardPrestage
This site is powered by FoswikiCopyright © by the contributing authors. All material on this collaboration platform is the property of the contributing authors.
Ideas, requests, problems regarding NRAO Public Wiki? Send feedback