See this page for Dirk's instructions

Steps to upload the fluxes so they can make it into the archive
  • After data reduction and the QA2 report are finished, and before data packing, check the following files in the ms calibration directories:
    • uid___A002_XYYYYYY_XZZ.ms.split.ampli_short_inf.fluxscale2
    • uid___A002_XYYYYYY_XZZ.ms.split.fluxscale
  • Fill in any missing information in the comment section of fluxscales2 and add any comment that could be helpful for the accuracy of the flux values
    • if there have been issues with the Tsys measurements, or the SSO model fit, etc.

Both files together with the script should be uploaded to the FTP server

ftp pub.alma.cl
username: earlyscience
password: almascience!.
cd fluxes
ascii
put uid___A002_XYYYYYY_XZZ.ms.split.ampli_short_inf.fluxscale2
put uid___A002_XYYYYYY_XZZ.ms.split.fluxscale
put uid___A002_XYYYYYY_XZZ.ms.scriptForCalibration.py
bye

-- ScottSchnee - 2013-11-13

This topic: ALMA > Cycle1DataReduction > UploadingFluxscaleFiles
Topic revision: 2013-11-21, ScottSchnee
This site is powered by FoswikiCopyright © by the contributing authors. All material on this collaboration platform is the property of the contributing authors.
Ideas, requests, problems regarding NRAO Public Wiki? Send feedback